![]() ![]() Cleaning a deck just after the last of the major pollen events (when your car doesn't change color from the pollen anymore) will minimize the seasonal outbreak of mold and mildew.Minimize water puddles under decks and the use of wet mulch up against the deck structure.Ensure adequate ventilation under and between decking boards.Ensure gutters / down-spouts and dryer vents do not discharge directly on decks.Prior to coating, properly clean the decking, rinse thoroughly with water and hose and allow to dry completely.Coatings should be applied within one week of cleaning for best results. ![]() To maximize application coverage, remove excessive organic growth or clumps prior to applying the cleaner.Ĭoatings for High Mold-Prone Environmentsįor environments prone to high mold growth, there are commercially available coatings and finishes that seal the wood surface when applied and they should be maintained per the manufacturer’s instructions. Do not mix recommended cleaning products together as harmful chemical reactions could occur. ![]() For best results, follow the manufacturer’s instructions and use cleaners within their stated shelf life. We recommend commercial cleaners containing oxalic acid. If mold is present, there are many commercial products available for cleaning mold. Remove leaves, debris, and other organic materials that provide a food source for mold. Climate conditions vary in different regions of the country and may necessitate more periodic cleaning. To minimize mold on your decking, clean your deck as often as needed, at least twice each year. Ensure there is adequate ventilation between deck boards and underneath the deck surface, so water can rapidly evaporate.Īnd since both mold and mildew feed on dead or decaying organic matter, so it is important to keep your deck clean of leaves and debris. To minimize these conditions, make sure water has the ability to flow away from the deck surface and areas surrounding the deck to lessen the absorption of water. When it comes to mold or mildew on wood decking, water and organic matter are the primary conditions that enable mold and mildew colonies to thrive. The best way to minimize mold and mildew growth is to control water and food sources. Mold and mildew need four things to thrive: air, water, temperatures between 32 and 120☏, and a food source, conditions that are common wherever humans live, work, and play. Mold and mildew are present everywhere in our environment, both indoors and outdoors. To remove mold from your treated deck, use mild soap and water solution and a stiff brush. Mold can grow on the surface of many products including wood (treated and untreated) due to exposure to moisture. Mold that you find on pressure treated wood is not an indication of a fungal attack. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |